top of page

Load data for .350 Legend + .357 | 125gr | Speer Hollow Point Gold Dot

Recommended Powder(s): Hodgdon LilGun, Lovex S040

.350 Legend + .357 | 125gr | Speer Hollow Point Gold Dot

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.357 | 125gr | Speer Hollow Point Gold Dot
Manufacturer SKU:
4012
Bullet Weight:
125gr | 8.1g
Bullet Diameter:
0.357" | 9.07mm
Bullet Length:
0.515" | 13.1mm
Caliber:
.350 Legend load data
Case Length (l3):
1.710" | 43.4mm
Cartridge Length (C.O.L.):
2.103" | 53.4mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
36.8 Grains of Water | 2.39 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
54969 psi | 3790 bar
LID:
LID_B6215_C500
Last updated:
2025-01-01

Load data for 24 loads in caliber .350 Legend with .357 | 125gr | Speer Hollow Point Gold Dot bullet and 12 powders such as Hodgdon LilGun, Lovex S040. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
97%
44309
81%
**20
98%
[Accurate 5744]*
<<locked>>
97%
47630
87%
**51
93%
Accurate No. 11 FS
<<locked>>
96%
46398
84%
**28
97%
Hodgdon LilGun 👍
<<locked>>
95%
48428
88%
**66
100%
[Lovex D060]*
<<locked>>
96%
43845
80%
**92
92%
[Lovex D063]*
<<locked>>
95%
47935
87%
**31
93%
Lovex S040 👍
<<locked>>
93%
49356
90%
**25
100%
[Lovex S053]*
<<locked>>
96%
30472
55%
**72
94%
SNPE Vectan BA6 1/2
<<locked>>
97%
28935
53%
**83
100%
[Shooters World Blackout]*
<<locked>>
95%
47935
87%
**31
93%
[Shooters World Buffalo Rifle]*
<<locked>>
96%
43845
80%
**92
92%
Vihtavuori N110
<<locked>>
96%
36260
66%
**97
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2205]*
<<locked>>
81%
26818
49%
**82
93%
[Accurate 5744]*
<<locked>>
90%
39146
71%
**07
90%
[Accurate No. 11 FS]*
<<locked>>
82%
27905
51%
**77
90%
Hodgdon LilGun
<<locked>>
81%
28993
53%
**41
99%
[Lovex D060]*
<<locked>>
92%
38653
70%
**97
90%
[Lovex D063]*
<<locked>>
89%
39102
71%
**87
90%
Lovex S040
<<locked>>
81%
33576
61%
**65
99%
[Lovex S053]*
<<locked>>
87%
23047
42%
**78
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
18362
33%
**88
96%
[Shooters World Blackout]*
<<locked>>
89%
39102
71%
**87
90%
[Shooters World Buffalo Rifle]*
<<locked>>
92%
38653
70%
**97
90%
Vihtavuori N110
<<locked>>
81%
22205
40%
**72
97%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page